preliminary designer's data sheet solid state devices, inc. 14005 stage road * santa fe springs, ca 90670 phone: (562) 404-4474 * fax: (562) 404-1773 features: 110 amp 30 volts schottky rectifier sedpack 3 sed110lb30 SED110LE30 maximum ratings 30 o c -55 to +175 top & tstg 1000 amps 110 amps io i fsm volts symbol units value v rrm v rwm v r r 2 jc 0.3 peak repetitive reverse and dc blocking voltage peak surge current (8.3 ms pulse, half sine wave superimposed on io, allow junction to reach equilibrium between pulses, t a = 25 o c) operating and storage temperature maximum thermal resistance junction to case average rectified forward current (resistive load, 60hz, sine wave, t c = 100 o c o c/w note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: sh0015a ? low reverse leakage ? low forward voltage drop ? hermetically sealed power surface mount package ? guard ring for overvoltage protection ? eutectic die attach ? 175 o c operating temperature ? tx, txv and space level screening available
0.3 0.35 0.4 0.45 0.5 0.55 0.6 0 20 40 60 80 100 120 140 160 0 10 20 30 40 50 60 70 80 90 100 0 25 50 75 100 125 150 175 200 preliminary solid state devices, inc. 14005 stage road * santa fe springs, ca 90670 phone: (562) 404-4474 * fax: (562) 404-1773 v f4 v dc 0.52 instantaneous forward voltage drop (i f = 110a dc , t a = 125 o c, 300 : s pulse) sed110lb30 SED110LE30 ma reverse leakage current rated v r , t a = 125 o c, 300 : sec pulse minimum 500 i r2 pf 7500 c j junction capacitance (v r = 5v dc , t a = 25 o c, f = 1mhz) reverse leakage current rated v r , t a = 25 o c, 300 : sec pulse minimum i r1 ma 7.5 case outline: p/n sed110kb30 forward voltage @t a = 25 o c power derating curve percent of maximum forward current rating (%) case temperature ( o c) forward voltage (v) forward current (a) case outline: p/n sed110ke30 electrical characteristics symbol units value v f1 v f2 v f3 0.40 0.46 0.55 instantaneous forward voltage drop (i f = 25a dc , t a = 25 o c, 300 : s pulse) (i f = 50a dc , t a = 25 o c, 300 : s pulse) (i f = 110a dc , t a = 25 o c, 300 : s pulse) v dc
|